Stumped on parking brake

987 Views 3 Replies 3 Participants Last post by Sudderth, 2 mo ago

VPoor

Discussion Starter · 2 mo ago

I have an 05 V1. The car has a V2 rear swap but still has the V1 hubs. When I bought the car the parking brake assembly and all the hardware was taken off and thrown away. Would I need a V1 or a V2 assembly? Also, would a base CTS assembly fit? The assembly is unfortunately discontinued from GM.

Tire Wheel Automotive tire Locking hubs Tread

See less See more

Save

1 - 4 of 4 Posts

Lt1z

· #2 · 2 mo ago

V2 uses an electric parking brake and V1 does not

Save

VPoor

Discussion Starter · #3 · 2 mo ago

Lt1z said:
V2 uses an electric parking brake and V1 does not

That would explain all the extra plugs on the rear

Save

Sudderth

· #4 · 2 mo ago

buy the shoes for a V1 and the cables. Shoes and cables should be the same for the CTV. You have a parking brake pedal so you could source the cable that goes to the back and the ones for each side. And, for that matter you could get all the used hardware from the parts car.

Save

1 - 4 of 4 Posts

Top Contributors this Month