Cadillac CTS-V Forum banner

Squeaky suspension bushings

1504 Views 8 Replies 7 Participants Last post by  SilverSedan
Has any one else had squeaky suspension bushings in a V2 coupe? Is there an easy fix? I have lowered so could the nuts have loosened?
Thanks, Richard
1 - 9 of 9 Posts
My car squeaks in a way I'd describe as more of a "creak" or "groan" than "squeal". Noise goes away when it's raining, so I know it's a lubrication issue. It's the sway bar bushings. When it gets to the point it really pisses me off, I jack the car up and squirt some lithium grease in to them.
I found the culprit in my case to be the de-bonding of these bushings from steel tube; this created a sliding interface that was never intended to be there.
I suppose this is the week I will replace mine. Strange that all summer there is no noise. Once it gets cold, and I live in Las Vegas, the front anti-sway bar bushings make horrible noise. Especially embarrassing since I have to go through a gate at work with speed bumps and guards. Squeak, squeak noise going in and out. It is such a pain to drop the subframe to get access to them. They are trapped between the frame and the body. I bought them last year and put it off until now... Will let you know how it goes.
I suppose this is the week I will replace mine. Strange that all summer there is no noise. Once it gets cold, and I live in Las Vegas, the front anti-sway bar bushings make horrible noise. Especially embarrassing since I have to go through a gate at work with speed bumps and guards. Squeak, squeak noise going in and out. It is such a pain to drop the subframe to get access to them. They are trapped between the frame and the body. I bought them last year and put it off until now... Will let you know how it goes.
Watch the little video I posted above

(I mean...just in case)
Move some place that is warm all year long, and you will never have to deal with squeaky bushings. :LOL:
1 - 9 of 9 Posts
Top