[CTS_Kenny]

Soon I’ll be installing the BMC rear spoiler that’s bolt on. I was taking a look under the trunk/deck lid and trying to figure out how to start removing all that that’s underneath.
I don’t wanna damage anything by forcing things out. So before I get started I wanted and to ask you guys to see if anyone had any experience with removing all the hardware and everything underneath the trunk lid?

 

[Ctarb1]

Pretty simple, just need the pry tool for all the push pins, those two rubber “bumpers “ thread in. You need to remove the plastic covers off the two arms as well. Think that little inside handle has two 8 or 10 mm bolts that’s about it. Wiring harness is on passenger side arm under that cover

 

[CTS_Kenny]

Pretty simple, just need the pry tool for all the push pins, those two rubber “bumpers “ thread in. You need to remove the plastic covers off the two arms as well

I’m not at home at the moment to look, so are those plastic covers pretty simple to remove? Self explanatory?
I do have a pry tool to get those push pins so awesome on that.
just counter clockwise the rubber bumpers I assume as well?
Thanks Ctarb1

 

[Ctarb1]

Covers are on with the push pins as well, and yes just in thread them