Cadillac CTS-V Forum banner

1 - 20 of 53 Posts

·
Registered
Joined
·
2,139 Posts
Discussion Starter #1
Have an update on when these will drop?

May as well do them all at once. Yaknow.
 

·
Registered
Joined
·
2,139 Posts
Discussion Starter #3 (Edited)
Hopefully by April 13th in the hands of WXM would be optimal. Car is due there for DSX system and retune anyways.

I think this is the year of the suspension. Once you release the rears i'd be in for a complete F/R kit.
 

·
Registered
Joined
·
420 Posts
Working on the cad files as I type this. I am hoping to get all the rear bushings done by this first quarter of this year.
Ill hold off on buying some stock replacements then....I need the aftermarket rears in a bad bad way!
 

·
Registered
Joined
·
2,139 Posts
Discussion Starter #6
Checking in. Lol.

Admittedly I went ahead and sourced the last of the white line radius arm bushings in existence. There are VERY FEW control arm bushings left.

You'll be the only game in town. I'm holding out as long as I can.
 

·
Site Supporter
Joined
·
79 Posts
The lathe has been tied up with a few other production parts. Once they are done, I will run some test pieces. So far I have Rear upper control arms, Rear lower control arms (Subframe), Shock bushing (hub), Trailing arm bushing (Hub), Cradle inserts, Cradle bushings (full bushing).

I am a little behind, but hopefully get some things out here real soon.
 

·
Registered
Joined
·
383 Posts
The lathe has been tied up with a few other production parts. Once they are done, I will run some test pieces. So far I have Rear upper control arms, Rear lower control arms (Subframe), Shock bushing (hub), Trailing arm bushing (Hub), Cradle inserts, Cradle bushings (full bushing).

I am a little behind, but hopefully get some things out here real soon.
Any updates?..

Sent from my SM-G920T using Tapatalk
 

·
Premium Member
Joined
·
14,879 Posts
Wait another three months before posting again, Payne!

Sent from my SM-N920V using Tapatalk
 

·
Registered
Joined
·
2,139 Posts
Discussion Starter #14
Balls
 

·
Registered
Joined
·
210 Posts
no word on these yet?????
 

·
Premium Member
Joined
·
14,879 Posts

·
Registered
Joined
·
2,139 Posts
Discussion Starter #19
As I'm working out...this thread pops up.

Tis the year of suspension...if I don't sell or go TT...
 
1 - 20 of 53 Posts
Top