Cadillac CTS-V Forum banner

1 - 20 of 220 Posts

·
Vendor
Joined
·
743 Posts
Discussion Starter #1 (Edited)
R1 Concepts| New High Carbon Alloy GEOMET Rotors!

R1 Concepts- High Carbon Alloy GEOMET Rotors!
We're happy to introduce to you all our new GEOMET High Carbon Alloy rotors! These rotors are a new and improved version of our "Premier Series" rotors. Manufactured for european and heavy vehicles, our High Carbon iron formulations enhances noise dampening characteristics, while providing high strength, and increased thermal conductivity compared to standard discs, which increases durability. Each rotor is engineered to match the OE vane configuration, including OE split-core technology to ensure proper and maximum heat dissipation. Additionally, all cores are dipped with a specifically formulated paint in order to provide a smoother finish inside the vane structure. The smooth finish will improve air flow as well as reduce the amount of machining require in or to properly balance the finished rotor during the mill-balancing process.

After all of the machining processes are completed, each rotor passes a 100% electronic inspection station that measures over 20 attributes to ensure that each rotor meets OE specifications. This further guarantees that each and every rotor delivered to you is trouble free. Finally we apply a genuine GEOMET Finish throughout the entire part, which promises to deliver superior corrosion protection. The GEOMET coating is processed dry, shipped dry, and ready to install without any additional preparation.

  • Superior Corrosion Protection- Provides excellent cyclic corrosion performance when tested to automotive manufacture's test methods incorporating heat, salt spray (withstands 400) and humidity.

  • Environmentally friendly, this meets the following regulations: Environmental Protection Agency (EPA), Chrylser CS-9003, General Motors GMW 3059, Ford WSS-M99P9999-A1 (Hex 9), the EU Directives on End of Life Vehicles (ELV) and Electrical Equipment (RoHS).

  • No Toxic Metal: Free of chromium, nickel, cadmium, lead, barium, and mercury


2009-2015 CTS-V
FT/RR CARBON ALLOY SLOTTED GEOMET ROTORS: $355 SHIPPED

FT/RR CARBON ALLOY DRILLED & SLOTTED GEOMET ROTORS: $440 SHIPPED


FRONT CARBON ALLOY SLOTTED GEOMET ROTORS: $215 SHIPPED

FRONT CARBON ALLOY DRILLED & SLOTTED GEOMET ROTORS: $295 SHIPPED

*NEW UPDATED PRICES AS OF 8/12/19*

*FRONT ROTOR WEIGHT=28LBS*

*FULL CAST DESIGN FRONT ROTORS*


BRAKE PADS

FT/RR R1 Optimum OE Pads (similar to OEM): $75

FT/RR R1 Premium Ceramic Pads: $65

FT/RR R1 Performance Sport Pads: $135
 

·
Premium Member
Joined
·
13,999 Posts
Are these "better" than the more expensive R1 rotors?

Sent from my SM-N920V using Tapatalk
 

·
Registered
Joined
·
3,071 Posts
Are these "better" than the more expensive R1 rotors?

Sent from my SM-N920V using Tapatalk
It's my understanding that these replaced the older premium rotors with the black hats. Now if I can just get mine shipped, I was told they got backed up during the switch so it's been a over a month now. I guess if they are better then i can wait.
 

·
Vendor
Joined
·
743 Posts
Discussion Starter #4 (Edited)
Are these "better" than the more expensive R1 rotors?

Sent from my SM-N920V using Tapatalk
Yes, these are an improved and new version of our Premier rotors with the black center hub. These rotors pretty much have a stronger and longer lasting rust protection coating (Geomet) that comes OEM and most vehicles. These may not look as nice as the Premier rotors but are an overall better rotor. Pricing is at a low price since it's a new product that we're selling and we'll soon be phasing out the Premier rotors. However this price is only for a limited time!

It's my understanding that these replaced the older premium rotors with the black hats. Now if I can just get mine shipped, I was told they got backed up during the switch so it's been a over a month now. I guess if they are better then i can wait.
Can you please PM me your information so I can double check on your order your placed with us?
 

·
Registered
Joined
·
3,071 Posts
Yes, these are an improved and new version of our Premier rotors with the black center hub. These rotors pretty much have a stronger and longer lasting rust protection coating (Geomet) that comes OEM and most vehicles nowadays. These may not look as nice as the Premier rotors but are an overall better rotor. Pricing is at a low price since it's a new product that were selling and we'll soon be phasing out the Premier rotors. However this price is only for a limited time!



Can you please PM me your information so I can double check on your order your placed with us?
PM box is full.
 

·
Registered
Joined
·
2,900 Posts

·
Premium Member
Joined
·
13,999 Posts
Prices will go up back to original Premier pricing after Wednesday! Be sure to take advantage of this sale while it lasts!
Sign me up for a set of four... PM inbound

Sent from my SM-N920V using Tapatalk
 
1 - 20 of 220 Posts
Top