[dreloc]

I bought the V from Henry V plug last year but never known this issue until i removed bumper to install HX. Can anyone help me by locating where exactly is driver side plug & harness connected to? I'm not too inclined on wiring especially reading diagrams. Any help or info is greatly appreciated.

Passenger side plug is tied with headlight harness for some reason

 

[dreloc]

Anyone?

 

[MrSurly]

I'm unclear on your actual question.
Please explain.
Are you trying to determine where the pictured connector plugs in to something?
Are you assuming that there is something missing?
Is your fog light NOT plugged into a harness, right now?
What is the setup on the passenger side?
The connectors tend to be the same or possibly mirrored on the other side.

 

[MrSurly]

Does the car have a CAI installed that is in that location under the headlamp?

 

[dreloc]

Just AirRaid and I looked under it nothing there. Do you know if headlights harness it's all tied in with the fog lights? Also there's only one fuse for fog not like headlights Left & Right.

 

[MrSurly]

dodged them all...

• Are you trying to determine where the pictured connector plugs in to something?
• Are you assuming that there is something missing?
• Is your fog light NOT plugged into a harness, right now?
• What is the setup on the passenger side?

 

[SofaKingSlow]

My previous owner (09 Sedan) ran a pair of wires from the pass side to driver side for the fog light. My driver side has no H11 connector and no evidence of ever having had one. No cut wires, no evidence of re-tape, no unused connectors in the area of the driver headlight.

 

[kittyboy]

Fog lights are overrated.

 

[dreloc]

dodged them all...

• Are you trying to determine where the pictured connector plugs in to something?
• Are you assuming that there is something missing?
• Is your fog light NOT plugged into a harness, right now?
• What is the setup on the passenger side?

-No, I know in fact it connects to the fog light since it is an H11 plug
-Yes, there is no H11 plug on the driver side
-Not at all, when I removed the bumper for the first time that's how I found the plug hanging & fog lights is still attached to the bumper
-Setup?

Fog lights are overrated. View attachment 161585

Trust me I wanted to delete the fogs so bad at first and skip all the headaches tracing wires but all I can find is WeaponX fog bezel in CF only and I have to cut out the fog mounting and I'm not about to do that lol. Yours is just straight up bold!

My previous owner (09 Sedan) ran a pair of wires from the pass side to driver side for the fog light. My driver side has no H11 connector and no evidence of ever having had one. No cut wires, no evidence of re-tape, no unused connectors in the area of the driver headlight.

So that's what I was thinking of doing since I bought extra H11 plug and just hardwire them from the other plug on the passenger side all the way to driver side. It seems like it's been cut somewhere for some reason because I didn't find the brake duct and fog has been replaced with TYC brand on the driver side.

 

[MrSurly]

I was confused by the pic. I thought the picture plug was on the driver side(?) and I was asking how the pass side was connected (set up).
Mine has the H11 plug on both sides. If I remember, I will see where it originates when I'm in the shop this evening.

 

[kittyboy]

-No, I know in fact it connects to the fog light since it is an H11 plug
-Yes, there is no H11 plug on the driver side
-Not at all, when I removed the bumper for the first time that's how I found the plug hanging & fog lights is still attached to the bumper
-Setup?


Trust me I wanted to delete the fogs so bad at first and skip all the headaches tracing wires but all I can find is WeaponX fog bezel in CF only and I have to cut out the fog mounting and I'm not about to do that lol. Yours is just straight up bold!


So that's what I was thinking of doing since I bought extra H11 plug and just hardwire them from the other plug on the passenger side all the way to driver side. It seems like it's been cut somewhere for some reason because I didn't find the brake duct and fog has been replaced with TYC brand on the driver side.

There's satisfaction cutting holes in cars, kind of like revenge for failure. Stubborn cars just laugh in your face and continue to cause grief!

 

[dreloc]

I was confused by the pic. I thought the picture plug was on the driver side(?) and I was asking how the pass side was connected (set up).
Mine has the H11 plug on both sides. If I remember, I will see where it originates when I'm in the shop this evening.

No sir, the plug is on pass side and it seems like it's bundled with 2 or 3 different plugs in one harness but I really appreciate it MrSurly if you can trace where it's coming from. Thank you sir

There's satisfaction cutting holes in cars, kind of like revenge for failure. Stubborn cars just laugh in your face and continue to cause grief!

Haha you ain't lying kittyboy you should've seen me trying to finagle the water hardline out & saw my grinder next to me just smiling