[KingColt]

I've been looking everywhere for 09-15 cts v strut tower brace spacer/raiser

If you have one for sell or know where to order them please lmk

 

[kittyboy]

I've been looking everywhere for 09-15 cts v strut tower brace spacer/raiser

If you have one for sell or know where to order them please lmk

Just use some wide diameter steel washers maybe?

 

[KingColt]

Just use some wide diameter steel washers maybe?

Do you think this would be safe? I'm running zl1 lid with 20mm spacer

 

[kittyboy]

Do you think this would be safe? I'm running zl1 lid with 20mm spacer

Sorry, I may have confused your post, I meant washers for the strut tower. I have a completely different setup, 1/2" phenolic spacers between the SC and heads and 1/2" spacer from ICT between the lid and body.

 

[KingColt]

Sorry, I may have confused your post, I meant washers for the strut tower. I have a completely different setup, 1/2" phenolic spacers between the SC and heads and 1/2" spacer from ICT between the lid and body. View attachment 158373

Your strut bar is different then mine. I still have the stock strut bar. But yes I'm basically doing the same thing but different parts.

I just didn't know if the washers would provide enough structural support for the strut bar to do its job.

 

[Karch]

Plenty of support if you torque them down.


Sent from my iPhone using Tapatalk

 

[KingColt]

Thank you

 

[DrMongo]

Looking at what you have pictured, I question why it is you need spacers. There appears to be plenty of clearance between the lid and what I am assuming is an aftermarket strut bar? With that said I am relatively certain I have a set of spacers acquired from Formato when I had them do my SC spacers and head work. I find no need for them with the ZL1 lid and stock bar. I will look when I get home on Sunday. If you would like them I would be happy to send them for the cost of shipping. Let me know if you want them and to where I would be shipping them and I’m sure it wouldn’t be more than a few bucks to ship them

 

[KingColt]

Looking at what you have pictured, I question why it is you need spacers. There appears to be plenty of clearance between the lid and what I am assuming is an aftermarket strut bar? With that said I am relatively certain I have a set of spacers acquired from Formato when I had them do my SC spacers and head work. I find no need for them with the ZL1 lid and stock bar. I will look when I get home on Sunday. If you would like them I would be happy to send them for the cost of shipping. Let me know if you want them and to where I would be shipping them and I’m sure it wouldn’t be more than a few bucks to ship them

That picture is the other guys car not mine.

And that would be awesome if you have a set I could get!

 

[t.j.t]

Deleted