Cadillac CTS-V Forum banner

1 - 20 of 23 Posts

·
I'm Your Pusher
Joined
·
11,320 Posts
Discussion Starter #1 (Edited)
Selling these for a client. This head and cam package is what I used to run my 10.5 at 134.5MPH

Cam is sold

Heads have behive springs and are $1800 shipped with stock LSA core exchange











 

·
I'm Your Pusher
Joined
·
11,320 Posts
Discussion Starter #3
yes 69CC and these heads are over $3300/pr from LPE!!!

Intake runner volume - LPE CNC: 275cc - Stock GM: 261cc
Exhaust runner volume - LPE CNC: 93cc - Stock GM: 89cc

Chamber Volume: 69 cc's
9.1:1 compression on a stock LS9 or LSA
10.7:1 on a stock LS3
9.55:1 on LPE low compression 427 short block
9.7:1 on LPE low compression 417 short block

- includes NEW GM LSA cylinder heads
- 2.165 Light-weight hollow stem intake valves
- 1.59 High performance Inconel exhaust valves
- Lingenfelter dual valve spring kit L230075897
- Lingenfelter titanium retainers, 7 degree bead lock valve locks , premium valve seals, valve spring seat cups

Minimum of 4.00 bore size recommended with this cylinder head.

Flow numbers are measured on 4.125 bore

LPE CNC L92 LS3 Flow Specs
Intake valve lift / Exhaust valve lift
.200 - 158 cfm / .200 - 116 cfm
.300 - 230 cfm / .300 - 161 cfm
.400 - 282 cfm / .400 - 201 cfm
.450 - 302 cfm / .450 - 213 cfm
.500 - 322 cfm / .500 - 220 cfm
.550 - 340 cfm / .550 - 226 cfm
.600 - 350 cfm / .600 - 231 cfm
.650 - 358 cfm / .650 - 234 cfm
.700 - 344 cfm / .700 - 237 cfm
 

·
Registered
Joined
·
561 Posts

·
I'm Your Pusher
Joined
·
11,320 Posts
Discussion Starter #5

·
Registered
Joined
·
508 Posts
Are the heads new?
 

·
Registered
Joined
·
561 Posts
Still pricey. LPE is 1677.00 new for both not each. save mostly tax and shipping.
 

·
I need about tree fiddy.
Joined
·
1,061 Posts
Still pricey. LPE is 1677.00 new for both not each. save mostly tax and shipping.
The price listed on there is for each one...says at the very top of the page.

"LINGENFELTER CNC PORTED GM LSA CTS-V, ZL1 CYLINDER HEADS 2009-2013
NEW COMPLETE CYLINDER HEAD ASSEMBLIES - SOLD EACH"

The other give away is that the shipping weight is 25 pounds...I highly doubt each head weighs 12.5 pounds.
 

·
I'm Your Pusher
Joined
·
11,320 Posts
Discussion Starter #9
Yep each indeed, exp!
 

·
Premium Member
Joined
·
2,041 Posts
Are the heads new?
 

·
Premium Member
Joined
·
1,409 Posts
As stated, the heads are $1677 each from LPE. Here is more proof since between their 700hp kit and 650hp kit the differences are heads and cam with a price difference of $4000.

http://www.lingenfelter.com/mm5/mer...PE&Product_Code=L250326509&Category_Code=C412

http://www.lingenfelter.com/mm5/mer...=L250300709&Category_Code=C412&Store_Code=LPE

Also, when I talked to LPE about them, they stated that they start from good used cores and deck and clean accordingly. These look as if that is what they are. So new from LPE using good cores.
 

·
I'm Your Pusher
Joined
·
11,320 Posts
Discussion Starter #12
heads are new, cam is sold
 

·
Registered
Joined
·
561 Posts
I can do 1800. Ask him if he will take it?
 

·
I'm Your Pusher
Joined
·
11,320 Posts
Discussion Starter #14
pending, owner PMing you his paypal addy
 

·
Registered
Joined
·
561 Posts
You know what barron let me check something out first don't lead him on. What I need from you is a dual catch can though.
 

·
I'm Your Pusher
Joined
·
11,320 Posts
Discussion Starter #17
LPE ported heads still up for grabs!
 

·
Registered
Joined
·
1,379 Posts
how much for the heads w/o core exchange (won't be able to swap until a few months from now).
 

·
I'm Your Pusher
Joined
·
11,320 Posts
Discussion Starter #19
Heads are still up for grabs!
 

·
I'm Your Pusher
Joined
·
11,320 Posts
Discussion Starter #20
I can do a little more without core exchange too
 
1 - 20 of 23 Posts
Top