Cadillac CTS-V Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
149 Posts
Discussion Starter #1
I changed out my halogen bulbs for LEDs and created a spreadsheet of all bulb types, whether they need a resistor, and where you can get them. Let there be light! :cool:

ITEMSOURCETYPEPRICERESISTOR
Low Beam HIDAmazonD1S (5k, 35w)$60No
Fog HIDAmazonH10 (6k, 55w, w ballast)$60No
DRL Turn SignalIJDM3157$40Yes
Driving LightIJDM194$15Yes
Side MarkerIJDM2825$10Yes
DoorsIJDM42mm Festoon$9No
DoorsIJDM42mm Festoon$9No
Under DashIJDM44mm Festoon Rigid$14No
Load Resistor x2IJDM50w 6ohm$22n/a
 

·
Registered
Joined
·
3 Posts
Side markers are 194 as well, so is the license plate. I do not have a incad bulb in my V at all. My recommendation is do not attempt to change front turn signals to LED, because the resistor has a constant load because the turn signal is not a separate wire.
 

·
Registered
Joined
·
149 Posts
Discussion Starter #3
Side markers are 194 as well, so is the license plate. I do not have a incad bulb in my V at all. My recommendation is do not attempt to change front turn signals to LED, because the resistor has a constant load because the turn signal is not a separate wire.
It is also tricky to wire correctly. The other forum has a write-up on it.
 
1 - 3 of 3 Posts
Top