[jcs003]

Johnson lifters aren't really available at the moment. I do have a new set of LS7 lifters but have read there have been issues.

Is there any other alternatives to LS7 and Johnson?

Thank you,

John

 

[Ctarb1]

Have you tried Matt? He had some sets. I got mine from him in his post 3 days ago he said he had a few more sets

 

[jcs003]

Have you tried Matt? He had some sets. I got mine from him in his post 3 days ago he said he had a few more sets

Considered it but very pricey, and just curious about other options.

 

[Ctarb1]

They weren’t to bad, he’s still offering them at current price 429$

 

[Blades1_99]

Johnson lifters aren't really available at the moment. I do have a new set of LS7 lifters but have read there have been issues.

Is there any other alternatives to LS7 and Johnson?

Thank you,

John

I'm running Morels with link bars.

 

[jcs003]

I'm running Morels with link bars.

Thoughts on Morels @Rubber Duck @Lt1z

 

[Lt1z]

I'm not a big fan of Morels myself based on having used a couple part numbers in the past but we can supply them. We do have a few sets of 2110 left at $429. When those are gone everything will go up significantly.

 

[JAustin]

I know a couple people that are using Thompson Motorsports Lifters. They are LS7 bodies with TMS custom internals. They seem to be holding on very well.

I'm not a big fan of Morels myself based on having used a couple part numbers in the past but we can supply them. We do have a few sets of 2110 left at $429. When those are gone everything will go up significantly.

Matt, what's significantly? Are we talking $100 increase....or more?

 

[Teh V]

I've been using Morel 6504s. Been 40k drama free miles & they were under $200.

 

[Lt1z]

I know a couple people that are using Thompson Motorsports Lifters. They are LS7 bodies with TMS custom internals. They seem to be holding on very well.



Matt, what's significantly? Are we talking $100 increase....or more?

More. A 2110R that was previously $449 will be over $700 moving forward. 2110 has been discontinued.

 

[jcs003]

Aren't 2110r shorter?

 

[jcs003]

I know a couple people that are using Thompson Motorsports Lifters. They are LS7 bodies with TMS custom internals. They seem to be holding on very well.



Matt, what's significantly? Are we talking $100 increase....or more?

The TMS set is $200

 

[Lt1z]

The TMS set is $200

Delphi LS7 can be had for $100 but its not apples to apples either

 

[jcs003]

Delphi LS7 can be had for $100 but its not apples to apples either

I discovered this. You need to be sure if they are genuine GM lifters as the Delfi are inferior.

 

[Lt1z]

I discovered this. You need to be sure if they are genuine GM lifters as the Delfi are inferior.

What do you think those Thompson start life as?

 

[jcs003]

What do you think those Thompson start life as?

Understood. This is why I was seeking your expert knowledge.

 

[Ctarb1]

Johnson’s for the win! Your going through all the effort and cost for the cam swap/ heads another 2-250$ isn’t going to matter for piece of mind

 

[jcs003]

You are not wrong. Problem is I hastily bought the LS7 lifters assuming I could not get Johnson lifters.

Johnson’s for the win! Your going through all the effort and cost for the cam swap/ heads another 2-250$ isn’t going to matter for piece of mind

 

[Ctarb1]

Throw them up in the classifieds someone will buy em, Would suck to miss out on the 2110’s especially at current price, I’d imagine Matt could gouge the price a bit if he wanted to do to the supply shortage

 

[Blown376]

Throw them up in the classifieds someone will buy em, Would suck to miss out on the 2110’s especially at current price, I’d imagine Matt could gouge the price a bit if he wanted to do to the supply shortage

Fair people on this forum are here to help, and the fact that he gave everyone advance warning before the major price increase solidifies his place here as an honest vendor. I bought my cam and related parts through him and he has always been clear with his advice.