[713V]

Some of yall know I have the fluidyne with fans.... now when we put it in, we tapped onto the radiator acc fan....

Now that I think about it, the more stupid that is to me. Sooooo

Here is what I'm thinking.... fluidyne setup doesn't come with a thermostat/controller.

I'm thinking of going a different route.

Inline hose housing for a thermometer with a controller of some sort... do any of yall have any ideas? Or am I completly over thinking this

I found online 18mm outer.. 14mm inner.. inline housing with I believe a 3/8 threaded hole. (I need bigger for 10/12an) just example.

Thermometer/controller for 12v is where im not really finding something suitable(mainly temp probe portion)

Any ideas would be appreciated thanks

 

[papi]

I think Lingenfelter sells the controller for their hx with fans separately.

 

[Karch]

Derale used to offer one, I think. Might have to tweak the thermistor values.


Sent from my iPhone using Tapatalk

 

[MrSurly]

Davies Craig offers some options on this. I bought one of these (from Summit) for my diff cooler install which I will finish during my new engine project. It really is a neat setup, the gauge itself is the controller.

 

[713V]

Awesome thanks for the replies! Any other ideas or thoughts lemme know! MrSurly that setup is pretty cool how do you like it?

 

[SteveM]

Not sure what you are trying to do, but the Aeroforce gauge has 2 inputs and optional outputs, it can be mounted in the dash. It also can display the cars ODB2 data.


Sent from my iPad using Tapatalk

 

[MrSurly]

Awesome thanks for the replies! Any other ideas or thoughts lemme know! MrSurly that setup is pretty cool how do you like it?

I actually don’t yet have it operational. :sadface: I installed the hardware but haven’t wired in the controller yet. I put it on my long list of things to wire in while doing the wide bands and other wiring… (i put it off)
I fully expect it to be straightforward and simple. Davies Craig specializes in cooling pumps and controllers. I have high hopes for their product.


Sent from my iPhone using Tapatalk

 

[jrV]

I went the Derale option with my Fluidyne.

 

[713V]

Not sure what you are trying to do, but the Aeroforce gauge has 2 inputs and optional outputs, it can be mounted in the dash. It also can display the cars ODB2 data.


Sent from my iPad using Tapatalk

I do have the aeroforce(unless it will control it) , but was looking at directly controlling the fans via temp

I actually don’t yet have it operational. :sadface: I installed the hardware but haven’t wired in the controller yet. I put it on my long list of things to wire in while doing the wide bands and other wiring… (i put it off)
I fully expect it to be straightforward and simple. Davies Craig specializes in cooling pumps and controllers. I have high hopes for their product.


Sent from my iPhone using Tapatalk

I mean that looks like an awesome setup especially if you have different needs rear diff, other fans etc

I went the Derale option with my Fluidyne.

I looked and saw several derale products.... which one did you go with?