Cadillac CTS-V Forum banner

Door Panel

1039 Views 5 Replies 3 Participants Last post by  Sudderth
Has anyone had a problem with the metal (carbon fiber look) inserts in the door panels? My drivers side insert hooked my sweater and pulled loose. Any ideas on a fix?
1 - 3 of 6 Posts
RTV and blue painters tape. use the silicone and then tape and leave overnight. It will be permanent.
That’s why I used the RTV to glue it back on. The pegs break off and that holds the part on without coming off again. The RTV can take bring slammed each time the door closes without coming off. Just be sure to wipe the dust off before you put the blind of silicone on each spot where the plastic pegs are
broken off. If you have the panel off you can use a large book of other weight to hold it in place overnight. Otherwise, tape works when the door panel is in place.
1 - 3 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.