Cadillac CTS-V Forum banner

pulley

  1. Gates K080685RPM Belt

    CTS-V Parts For Sale
    Wanted to use this belt but it ended up being too short for my pulley setup. These are the best belts on the market and stay very tight / do not stretch. I simply test fitted it and removed it (never used it on my car). They're quite difficult to find as well. My loss is your gain, as I needed...
  2. 9.55" Lingenfelter Lower Pulley / Ring L220290709

    CTS-V Parts For Sale
    Used for about 3,000 miles. Great condition (see pictures) Summit's got it for $174 shipped https://www.summitracing.com/parts/lpe-l220290709 Lingenfelter's got it for $189 shipped https://www.lingenfelter.com/product/L220290709.html#.XDpp6WqouUk PM me and/or reply here if interested Packed...
  3. Kristen, our WEAPON-X Spokesmodel talks about our Black Friday Sale! >$16K in prizes!

    Weapon X Motorsports
    Kristen, our WEAPON-X spokesmodel gives you quick feature about our incredible Black Friday Sale, where not only will you find the BEST deals, but also enter to win over $16,000 in prizes including Forgeline Wheels, a Whipple Supercharger, WEAPON-X Aero, Chiller, Heat Exhcanger, Store coupons...
  4. LFP 2.4 Upper Pulley & Solid Isolator

    CTS-V Parts For Sale
    soldddddddddddddddddddddddddd
  5. LSA noob mod advice

    General 09 Up CTS-V Questions
    I just got this 2012 CTS-V A6 Sedan and have been talking to John at Dedicated about upgrades and had a few questions that I wanted to relay though everyone. First of all this car has QTP cutouts, Airaid Intake, ZL1 lid, and a trunk mount icebox with 3/4" line running all the way up to the lid...
  6. New Engine and Need Some Advice

    Engine/Supercharger
    Hi all,I need to bounce some ideas off of you At 60K miles I discovered that I had a catastrophic failure of my inter-cooler brick which resulted in it dumping all of the inter-cooler fluid down into the cylinders while under load. The long and short is that the car received a new GM LSA as a...
  7. WEAPON-X "Boost Freeze" Chiller

    2016+ CTS-V Talk
    With a well known name for the best heat exchangers and ancillary cooling mods on the market, we have been working on the next step in cooling for the past year and after testing various combinations, we are finally ready to release our Boost Freeze chiller! We have developed a complete plug...
  8. ATI Lower Harmonic Balancer (Lingenfelter L220050709) & 9.17" Pulley Ring (L220170709)

    CTS-V Parts For Sale
    Just bought a 2012 CTSV Wagon, and the following was installed (I have no use for these): https://www.lingenfelter.com/product/L220050709.html#.WiQh4MGouUk https://www.lingenfelter.com/product/L220170709.html#.WiQiKsGouUk Lingenfelter L220050709 ATI Harmonic Balancer Lingenfelter L220170709...
  9. MONT MOTORSPORTS BLACK FRIDAY SALE IS LIVE

    Mont Motorsports
    MONT MOTORSPORTS BLACK FRIDAY SALE IS LIVE *** CLICK HERE TO SHOP NOW *** NOW through Sunday 11/26/17 We will be adding a few more products throughout throughout the day tomorrow. Save BIG on hundreds of products! If you have any questions, please email us at [email protected]
  10. WEAPON-X BLACK FRIDAY SALE - GRAND PRIZE: WHIPPLE SUPERCHARGER!

    2016+ CTS-V Talk
    WEAPON-X Motorsports BLACK FRIDAY SALE - GRAND PRIZE: LT WHIPPLE SUPERCHARGER! WEAPON-X has grown leaps and bounds, bringing you more of our great signature products as well as new partnerships for the complete performance packages. Our Black Friday Sale is considered one of the best in the...
  11. FS: ID850 Injectors

    CTS-V Parts For Sale
    -SOLD-
  12. Is this snout bearing bad?

    Troubleshooting
    I recently did my own pulley install and there was a metallic whine happening that forced me to remove the snout and evaluate the situation. Facebook land is leading me to believe that it's either the isolator pushing/forcing the supercharger rotors too far to the back or the bearings in the...
  13. Stage One 2012 Sedan

    General 09 Up CTS-V Questions
    I have bought and received ID1080X injectors, HD Belt, 2.5" upper pulley and a flex fuel sensor is in route. HP Tuner Pro is also in the mail with Pat G Tuning doing email support. I plan on filling up with e85 whenever I want to have some extra fun... Should I drop an additional $80, on NGK...
  14. Help! Need more power but it's my DD

    Engine/Supercharger
    A couple months ago I became a Cadillac owner for the first time. First time having a supercharged V8 as well and you already know it's a monster. This car is my daily driver and I do rack up a ton of highway miles. I'm looking to do the following mods but would like to know the affects it would...
  15. Metco Pulley Experience - Unreliable, Never Again

    Engine/Supercharger
    FYI, I've owned a Metco 2.40 pulley for a couple of years. I purchased it vs. the Lingenfelter only because I liked the factory look and feel. I recently sent in my supercharger for a bearing refresh to superchargersonline.com (Eaton recommended them to me as their only factory authorized repair...
  16. 09 stock parts

    CTS-V Parts For Sale
    Just installed a couple parts so have these laying around. -Stock injectors: $150 shipped OBO ***SOLD*** -Stock Lid: $150 shipped OBO -Stock Throttle Body: Make an offer -Stock upper pulley, idler, and belt: ***SOLD***
  17. Blower with ported snout and 2.5 pulley FS/FT

    CTS-V Parts For Sale
    I want to install this snout but I should get some headers first. Here's what I've got. 1900 blower with 20k miles. Rotors spin freely and the coating looks good. Ported LSA snout with 102mm TB inlet. Metco 2.5 pulley on an interchangeable hub. $1100 or trade for factory connect type sedan...
  18. Mont Motorsports - Metco Pulleys & Accessories Pricing!

    Mont Motorsports
    We are now an official dealer of Metco Motorsports! We will be offering their full line of products to match whatever your needs may be! PM US FOR SPECIAL PRICING ON ALL METCO PARTS FOR ALL CTSVowners MEMBERS 2009 - 2015 CTS-V - Click any link below for more information CTS-V Upper Pulley...
  19. Build Help! Do I Have Everything I "Need" ?

    Build Threads
    My 2011 CTS-V w/ 70,000 kms currently has a 2.55'' upper (solid isolator) w/ AirAid + Green Filter + Corsa Axel Back, i will be ordering the following parts 1. Oil Catch can 2. Injector Dynamics ID850’s 3. Kooks 1 7/8’’ Headers to 3’’ X-Pipe w/ cats 4. 9.1’’ Lower pulley + IW Balancer 5. 50mm...
  20. TVS 1900 Input shaft play

    Troubleshooting
    Does anyone know the input shaft play tolerances allowed? I installed a Lingenfelter solid isolator about 3000 miles ago and it was a very, very snug fit. When I reassembled I ran it and it made a squeaking noise like the sound of a snug non metal squeak. The noise eventually went away for...
Top