heat exchanger

Recently installed new Tank and retained the Factory T-Fill for venting purposes. To bleed the system, is it proper to keep both the Tank and T-Fill capped, run the car at idle for 5-10 minutes, then open bleeder screw until steady coolant stream occurs?

With a well known name for the best heat exchangers and ancillary cooling mods on the market, we have been working on the next step in cooling for the past year and a half and after testing various combinations, we are finally ready to release our Boost Freeze Chiller! We have developed a...

With a well known name for the best heat exchangers and ancillary cooling mods on the market, we have been working on the next step in cooling for the past year and a half and after testing various combinations, we are finally ready to release our Boost Freeze Chiller! We have developed a...

With a well known name for the best heat exchangers and ancillary cooling mods on the market, we have been working on the next step in cooling for the past year and after testing various combinations, we are finally ready to release our Boost Freeze chiller! We have developed a complete plug...

Hey guys I was analyzing my cooling system today and noticed that I currently have 3/4'' ID Heater hose. I am thinking about going to 1'' Heater hose however thought I would see if anybody has done it before and noticed a difference. Please note my current Internal diameter is 3/4'' My gut...

2.55/9.1 pulley setup, stage 2 custom cam kit, airaid, ported snout, injectors, kooks longtubes and x pipe... I'm only going to be able to do either a Upgraded HX OR a upgraded pump with an 1.8 gallon ice box with factory HX. Daily driver occasional mexico and weekend drag strip I already...

I have bought and received ID1080X injectors, HD Belt, 2.5" upper pulley and a flex fuel sensor is in route. HP Tuner Pro is also in the mail with Pat G Tuning doing email support. I plan on filling up with e85 whenever I want to have some extra fun... Should I drop an additional $80, on NGK...

As you guys know, the WEAPON-X heat exchangers are the most highly heralded and requested by tuners from shops all over the world. So, of course we'll be on the forefront of the V3 market! ;) The prototypes are in and going on the car today, they're MONSTERS! Any of you guys who have had the...

Sold!!

Mont Motorsports is now an authorized wholesale dealer for C&R Racing C&R Racing has designed and built some of the finest racing components for the top professional teams in motorsports. For the past 25 years, every NASCAR Cup Champion, Indy 500 winner, and Daytona 500 winner have had...

Hi All, Does anyone have any experience using the C&R Racing Heat Exchange? I haven't seen any posts about people using them but they are coming recommended by my local tuner. Their website states "C&R Racing is the primary supplier of cooling systems in NASCAR’s Sprint Cup, Nationwide, Camping...

I will be adding the following modifications to my 2011 CTS-V and wanted to get some recommendations on some good cooling options 1. Corsa Sport Axel-Back Exhaust = installed 2. 2.55’’ Upper w/ Solid Isolator= installed 3. 160* T-Stat = installed 4. ZL1 Lid 5. AirAid Intake w/ Green Filter -...

The Korkar Performance direct replacement heat exchanger is like no other on the market. Our HX fits in the OE location uses the OE mounts, fittings and lines for an easy install. No bumper removal or cutting up your CTS-V. Features 1.25" 16 fin/in. upgraded core with 103% more surface area than...

D3PE PROSPEED Front Mounted 3 Gallon Heat Exchanger Tank D3PE is proud to release our first product for the CTSV in our PROSPEED series of products. This tank takes the place of the OEM washer bottle and surrounding area, adding a total of 3 gallons to the existing system, and also allows...

Hello Everyone - This is my first post. I just got a 2011 V Coupe A6 about 10 days ago... already getting a brand new tranny, it broke just a couple days of getting it, but its under warranty so no biggie. Worse things happened to my Dad's new ATS. And I just came off an 09 V6 mustang... I had...

D3 Heat Exchanger, TR7IX Plugs D3 heat exchanger used, going a different route. SOLD Paypal [email protected]

SOLD: 1 brand new in box 36" x 7" x 5.5" Heat Exchanger for a CTS-V - $675 shipped, plus 3% for Paypal or credit card fees. Included below is the link to some similar parts that we found online, complete with installation instructions, to use as a reference. FLUIDYNE CTS-V Heat...

I am going stage 2 on my mods in the next week. I already have on my 2011 Coupe - B&B Headers, high flow cats, and B&B Cat Back. My next mods are on the way from KDI. I am going with their street sweeper cam, ID850 injectors, 160 thermostat, 10" crank pulley, 2.85 snout pulley, idler...