Search Results for ‘headers’

Is anyone on here running the Hooker Blackheart Short Headers on their V2? If so, what are your thoughts? Have you seen any improvements with them installed? Do you have any sound clips?

Hi all,I need to bounce some ideas off of you At 60K miles I discovered that I had a catastrophic failure of my inter-cooler brick which resulted in it dumping all of the inter-cooler fluid down into the cylinders while under load. The long and short is that the car received a new GM LSA as a...

WEAPON-X Motorsports 2017 YEAR END SALE - WIN UP TO $1,000 IN X BUCKS FOR OUR ONLINE STORE! CADILLAC SALES LINKS: CTS V gen 3 LT4: HERE CTS V gen 2 LSA: HERE CTS V gen 1 LS2/LS6: HERE ATS V gen 1 LF4: HERE WEAPON-X's 2017 Year End Sale is your last chance to take advantage of our...

ALL Stainless Works Headers & Exhaust systems will be 10% OFF from 11/23 to 11/30. This includes fitments for: C5 / C6 / C7 Corvette, Gen 5 Camaro, Gen 6 Camaro, Gen 2 Cadillac CTS-V, Gen 3 Cadillac CTS-V, Dodge Hellcat, & more! This is your chance to save BIG on any header / x-pipe / exhaust...

It's already that time again for the largest sale of the year - BLACK FRIDAY As always, we want to hear from our customers what you want to see on sale. The more we hear from you, the more we will put on sale! Now's the time to stack those parts up for the winter build, or have your wife get...

SALE IS LIVE - CLICK HERE It's that time of year again where the holidays seem to come every couple of weeks, so you know what that means... SALES, SALES, SALES! We'll be launching our Labor Day Sale next Friday, September 2nd & will run until Monday, September 5th at midnight. ANYONE...

Stainless Works Headers & Exhaust now available at Mont Motorsports Header & Exhaust fitments available for both 2009-2015 Cadillac CTS-V & 2004-2007 Cadillac CTS-V Stainless Works Headers & Exhaust ^^^ LINK ABOVE ^^^ *** FREE SHIPPING ON ALL STAINLESS WORKS ORDERS *** PM US OR GIVE US A...

I installed SW headers on my Auto 2012 at my shop and got her tuned today at 21st CMC. The baseline dyno with intake and catback was 467rwhp and 460rwtq. After headers and the tune she put down 530rwhp and 483rwtq. The numbers were higher than I, and the shop expected. Granted it was warm when...

Mont Motorsports is now an authorized wholesale dealer of Quick Time Performance Cut Outs! QTP Low Profile kits starting at $399.99! QTP Low-Pro Cutouts $399.99 - Mont Motorsports ^^^ LINK ABOVE ^^^ When used with QTP's wireless kit, these cutouts can be programmed to use the Homelink...

Mont Motorsports is now an authorized wholesale dealer for Kooks Headers & Exhaust Kooks Headers & Exhaust have been around since 1962 & is known for their products fit & finish! Kooks Headers & Exhaust - Mont Motorsports ^^^ LINK ABOVE ^^^ *** FREE SHIPPING ON ALL KOOKS PRODUCTS *** Headers...

Mont Motorsports is now an authorized wholesale dealer of American Racing Headers - ARH MONT MOTORSPORTS - AMERICAN RACING HEADERS 09-15 CTS-V (LSA) ^^^ LINK ABOVE ^^^ American Racing Headers are built 100% in the USA American Racing Headers CTS-V systems will deliver the performance you'd...

SOLD

*UPDATE...You can see and hear the car in action HERE* I had my car in for a little spring upgrade that included: Stainless Works catted LT's w/ Black Satin ceramic coating MSD Wires NGK TR7ix spark plugs Lingenfelter Varimax Intercooler Pump Big 3 Racing Heat Exchanger Tank Aeroforce gauge w/...

Looking to install either Kooks or ARH headers w/ high flow cats to my corsa sport axel back on my 11' V sedan, but these exchange rates and duties are a KILLER! To have them shipped from the US (weaponx) duties, taxes, and the ex rate alone im looking at $3000++ for a set Any suggestions?

Disclaimer: This thread is for informational purposes only. There have been many questions about "How much power are headers worth on our cars?" and as it so happened, I was in a position to try to find out. This thread will NOT guarantee you XX gains, nor will it differentiate between...

My American Racing headers just left Calico coatings - with a little luck I might be able to get them installed this week! The setup: Baseline the recent build in the morning (to account for weather changes): Factory exhaust with primary cat delete (straight pipes welded in), however...

Afternoon, cunts. I'm looking for a set of OEM mufflers from a 09-14 sedan/wagon. I'm in the process of installing B&B test pipes to get rid of the cats and want to put the stock mufflers back onto the car. Let me know what you want for a set shipped to 32408! I'll even mail you a couple...