Search Results for ‘cooling’

Hi guys i have 2016 ctsv cooling fan not working checked fuse box I believe fuse 71 is the one for cooling also I checked the connector on the top of the fan seems to have electric. Any advice what i need to check before i take it to a dealership and pay 200 so they can check it Appreciate it guys

CTS V2 competition 19" Xtreme Chiller, No H/E Bypass System. Complete Kit, Wiring, Hoses and Hardware. $900 shipped to the lower 48 only. Can also be po led up in East Los Angeles next to Garfield High School. Never installed, sat in my garage for close to a year. Everything included...

My 09 blew the small coolant line (actually the plastic fitting crumbled) that runs to the chrome pipe on the left side of the engine 100 miles ago. Kept smelling antifreeze when I would walk into the house from the garage. Thought the engine was just boiling off the sprayed coolant. Went on the...

With a well known name for the best heat exchangers and ancillary cooling mods on the market, we have been working on the next step in cooling for the past year and after testing various combinations, we are finally ready to release our Boost Freeze chiller! We have developed a complete plug...

Hey y'all, I'm new to this forum as of today and new to the world of the CTS-V as of Friday. I bought a ProCharged '05 and yes, it's fully built. It makes about 600rwhp. However, it has a horrible problem with overheating when in stop and go traffic. It has a stock radiator in it with two...

Hey guys, I am running 1'' ID lines for as much of my cooling system as possible. What is the best way to connect 1'' ID lines to my ZL1 Lid?

Hey guys I currently have the under hood ice tank with Zl1 pump. I already have and plan on installing the EMP reprogrammed pump. While doing this I am debating on going to the trunk tank for extra capacity as I think the EMP will be pushing the coolant too quick through the current set up. I...

I think my Varimax pump failed... my IAT is climbing at an insane rate under boost. I put a volt meter on it and voltage was perfect.... Should I order another Varimax pump? Switch to another brand? Any of you have this issue before? Pulley combo is 2.5/9.1 Cooling mods: FTP low mount HX, 14 AN...

Hey guys I was analyzing my cooling system today and noticed that I currently have 3/4'' ID Heater hose. I am thinking about going to 1'' Heater hose however thought I would see if anybody has done it before and noticed a difference. Please note my current Internal diameter is 3/4'' My gut...

All So this weekend somehow I punctured my heat exchanger. I was running the low mount double sided 36''. With an under hood ice box and current set up (see signature) I was pushing 140s/150s IAT2s at the 1/2mile event in NC last month. I thought that was pretty decent considering it was mid...

Going with a 2.55/9.55 pulley combo, stage 2.5 cam kit, cai, longtubes x pipe, ported snout, 93 tune (E85 is not an option) injectors, dw300c drop in pumps, ice tank and lpe pump. I got 3 choices can't do both, Ported LSA heads or Ported blower OR meth injection.. My bigger concern with the...

2.55/9.1 pulley setup, stage 2 custom cam kit, airaid, ported snout, injectors, kooks longtubes and x pipe... I'm only going to be able to do either a Upgraded HX OR a upgraded pump with an 1.8 gallon ice box with factory HX. Daily driver occasional mexico and weekend drag strip I already...

Had on car for 2 months. Black in color under hood model, works great. PM me for pictures. SOLD!!!

I will be adding the following modifications to my 2011 CTS-V and wanted to get some recommendations on some good cooling options 1. Corsa Sport Axel-Back Exhaust = installed 2. 2.55’’ Upper w/ Solid Isolator= installed 3. 160* T-Stat = installed 4. ZL1 Lid 5. AirAid Intake w/ Green Filter -...

D3 Heat Exchanger, TR7IX Plugs D3 heat exchanger used, going a different route. SOLD Paypal [email protected]