New boost only pb
Welcome to the Cadillac CTS-V Forum at CTSVOwners.com.
Results 1 to 19 of 19
Like Tree15Likes
  • 9 Post By Tking7
  • 4 Post By Tking7
  • 1 Post By thereason
  • 1 Post By BlackMarketRacing

Thread: New boost only pb

  1. #1
    Vendor
    Join Date
    Apr 2015
    Posts
    518
    Likes (Given)
    2
    Likes (Received)
    24
    I call BS (Given)
    0
    I call BS (Received)
    0

    New boost only pb

    Took my car down to Fayetteville for a track rental to try for that 8 second pass that's been dodging me. Upgraded my fuel system so I wanted to make sure the tune was dialed in first so decided to make a pass on boost first. Went to launch and car broke the driver rear axle. Luckily I brought a spare and changed it in the staging lane. Started the car up and went straight back to the line, the car launched and made a 9.2@147, fueling looked good, iats were a little high since I didn't put ice in it so it was pulling timing. Decided to turn the spray on since I was running out of time(wish I would have made another blower pass). Tried to make a pass but the car was making a lot more power and was hitting the limiter to fast. We decided to bring the shifts down and try it again but it broke the axle again. Guess it's time for stronger axles. Still had a great time with a bunch of other cars I will post about later when my vendor status goes in effect.


    Sent from my iPhone using Tapatalk
    9.01@153


    Mods: Custom RCR cam,RCR tune, head studs 9.1/2.4, 102 TB, ported LS9 heads, ported snout, 5"intake,1300 injectors, E85, ARH longtubes, 3" exhaust to midmufflers, ZL1 lid, Aldo Trunk mount ice box and HX,17x5 Welds up front, 15x10 Welds on 275Pro, Nitrous spray bar


  2. #2
    Registered User
    Join Date
    Jul 2015
    Location
    S. FL
    Posts
    42
    Likes (Given)
    0
    Likes (Received)
    0
    I call BS (Given)
    0
    I call BS (Received)
    0
    Those 60fts are crazy. Breaking axles sucks but it's a problem I wouldn't mind having. Impressive work.
    2010 Thunder Grey sedan
    10.93@127 1.69 60ft.
    Upper/lower pullies, lingenfelter HX, ARH headers, Pat G spec cam and some other stuff

  3. #3
    Vendor
    Join Date
    Apr 2015
    Posts
    518
    Likes (Given)
    2
    Likes (Received)
    24
    I call BS (Given)
    0
    I call BS (Received)
    0
    9.01@153


    Mods: Custom RCR cam,RCR tune, head studs 9.1/2.4, 102 TB, ported LS9 heads, ported snout, 5"intake,1300 injectors, E85, ARH longtubes, 3" exhaust to midmufflers, ZL1 lid, Aldo Trunk mount ice box and HX,17x5 Welds up front, 15x10 Welds on 275Pro, Nitrous spray bar


  4. Remove Advertisements
    CTSVOwners.com
    Advertisements

  5. #4
    9 second club
    Join Date
    Jan 2014
    Location
    Moseley, VA
    Posts
    694
    Likes (Given)
    39
    Likes (Received)
    25
    I call BS (Given)
    4
    I call BS (Received)
    1
    Impressive run !!
    2012 Black Diamond Coupe A6
    21st Century Muscle Cars build stage #1
    Jeremy Formato stage #2,3

    stock bottom end, no nitrous

    9.72@142

  6. #5
    Active Member
    Join Date
    Feb 2014
    Location
    Somewhere out there
    Posts
    376
    Likes (Given)
    0
    Likes (Received)
    0
    I call BS (Given)
    0
    I call BS (Received)
    1
    Quote Originally Posted by Tking7 View Post
    Got dayum, is this video fast forwarded lol?!
    Tking7 likes this.

  7. #6
    Vendor
    Join Date
    Nov 2013
    Location
    Phoenix
    Posts
    1,892
    Likes (Given)
    36
    Likes (Received)
    23
    I call BS (Given)
    0
    I call BS (Received)
    0
    Nice times Tim! Can't wait to see what next year brings
    Tking7 likes this.
    Hidden Content
    Brands you can find at the Black Market!
    Procharger | Whipple | Borg Warner Turbos | Injector Dynamics | JMS| ARH | Cobb | Fore | Squash | Meisterschaft | Weld Wheels | Forgestar | MRR Wheels | M&H Tires | MHT Wheels | Weds Wheels | ProEFI | Megasquirt
    and many more! Call 480-382-1696 or email Hidden Content
    Hidden Content

  8. #7
    Active Member
    Join Date
    Mar 2013
    Posts
    2,983
    Likes (Given)
    0
    Likes (Received)
    163
    I call BS (Given)
    0
    I call BS (Received)
    11
    Great pass and that picture is sick!
    old slow pontiac
    Hidden Content

  9. #8
    Active Member
    Join Date
    Feb 2015
    Location
    Fort Mill, SC
    Posts
    4,276
    Likes (Given)
    25
    Likes (Received)
    116
    I call BS (Given)
    3
    I call BS (Received)
    15
    What RPM's is it turning or is that top secret info?

  10. #9
    Vendor
    Join Date
    Apr 2015
    Posts
    518
    Likes (Given)
    2
    Likes (Received)
    24
    I call BS (Given)
    0
    I call BS (Received)
    0
    Quote Originally Posted by blubyu View Post
    What RPM's is it turning or is that top secret info?
    lol 7300ish
    9.01@153


    Mods: Custom RCR cam,RCR tune, head studs 9.1/2.4, 102 TB, ported LS9 heads, ported snout, 5"intake,1300 injectors, E85, ARH longtubes, 3" exhaust to midmufflers, ZL1 lid, Aldo Trunk mount ice box and HX,17x5 Welds up front, 15x10 Welds on 275Pro, Nitrous spray bar


  11. #10
    Active Member
    Join Date
    Feb 2015
    Location
    Fort Mill, SC
    Posts
    4,276
    Likes (Given)
    25
    Likes (Received)
    116
    I call BS (Given)
    3
    I call BS (Received)
    15
    Quote Originally Posted by Tking7 View Post
    lol 7300ish
    I figured it was about the same as Ricks but these cars sound pretty crazy once you start getting above 7k. Pushrod power!

  12. #11
    9 Second Club
    Join Date
    Jul 2013
    Location
    Jacksonville
    Posts
    1,811
    Likes (Given)
    20
    Likes (Received)
    54
    I call BS (Given)
    0
    I call BS (Received)
    0
    "After the new rear end gears" wrote on bottom of that pic, what is that all about?

    Car is flying boost only.
    2.4/9.5 pulleys, Built block, Ported Blower, 102mm ported Snout, 102mm TB, ported and milled stock heads, G-Force 4.5" intake, SW Headers, BTR Stage 3 Cam, Flex fuel, 4.5 gallon trunk tank, ZL1 lid, WeaponX heat exchanger, Fore triple pump fuel system, ID850s, Nitrous Outlet spray bars, Formato Ecu tune with 6l80etuning.com tranny tune.
    683whp on pump, 725whp on e85, 975whp on 150 shot
    10.4@137.7 on boost, 9.74@146 on spray
    Hidden Content

  13. #12
    Vendor
    Join Date
    Apr 2015
    Posts
    518
    Likes (Given)
    2
    Likes (Received)
    24
    I call BS (Given)
    0
    I call BS (Received)
    0
    Quote Originally Posted by Urbamworm View Post
    "After the new rear end gears" wrote on bottom of that pic, what is that all about?

    Car is flying boost only.

    No idea, I found the pic like that. My guess is someone seen me changing the axle and thought I changed the rear end.
    9.01@153


    Mods: Custom RCR cam,RCR tune, head studs 9.1/2.4, 102 TB, ported LS9 heads, ported snout, 5"intake,1300 injectors, E85, ARH longtubes, 3" exhaust to midmufflers, ZL1 lid, Aldo Trunk mount ice box and HX,17x5 Welds up front, 15x10 Welds on 275Pro, Nitrous spray bar


  14. #13
    9 Second Club
    Join Date
    Jul 2013
    Location
    Jacksonville
    Posts
    1,811
    Likes (Given)
    20
    Likes (Received)
    54
    I call BS (Given)
    0
    I call BS (Received)
    0
    lol
    2.4/9.5 pulleys, Built block, Ported Blower, 102mm ported Snout, 102mm TB, ported and milled stock heads, G-Force 4.5" intake, SW Headers, BTR Stage 3 Cam, Flex fuel, 4.5 gallon trunk tank, ZL1 lid, WeaponX heat exchanger, Fore triple pump fuel system, ID850s, Nitrous Outlet spray bars, Formato Ecu tune with 6l80etuning.com tranny tune.
    683whp on pump, 725whp on e85, 975whp on 150 shot
    10.4@137.7 on boost, 9.74@146 on spray
    Hidden Content

  15. #14
    Active Member
    Join Date
    Jun 2013
    Location
    Tallahassee, FL
    Posts
    1,173
    Likes (Given)
    8
    Likes (Received)
    10
    I call BS (Given)
    0
    I call BS (Received)
    1
    awesome!!!!!
    Hidden Content

    2010 WD A6 sedan - Recaros, 20x9/10.5 Concept One CS-6.0 , V2V Designs, Aeroforce, Hawk Pads, Eibachs, Airaid w/green filter, SideSwipe, Ported TB, BR7EF, Solid Iso, ZL1 Lid, 2.4 upper, 100mm Idler, FIC 850s, Kooks, NorCal Tank, Track Attack HX, Varimax Pump, Flex Fuel, DSX fuel system, Vengeance Racing Tuned
    Best 1/8 6.88 @ 104.05
    Best 1/4 10.67 @ 131.95 1.58 60ft -- 75% E
    Track: stock wheels w/ Mickey Thompson DR's 305/35/19

  16. #15
    Active Member
    Join Date
    Jan 2016
    Location
    Dayton Ohio
    Posts
    206
    Likes (Given)
    0
    Likes (Received)
    7
    I call BS (Given)
    0
    I call BS (Received)
    0
    TKRacing getting it done!

    It's amazing how easily and quickly TKR can build a everyday 9sec street car, without breaking the bank!

    Cant wait to see what's next for this car....rumor has it that a new lineup of TKR combinations will be available soon. I know I'm on the list!

  17. #16
    9 second club
    Join Date
    Jan 2014
    Location
    Moseley, VA
    Posts
    694
    Likes (Given)
    39
    Likes (Received)
    25
    I call BS (Given)
    4
    I call BS (Received)
    1
    I'm interested in the new TKR 4:56 gears.
    2012 Black Diamond Coupe A6
    21st Century Muscle Cars build stage #1
    Jeremy Formato stage #2,3

    stock bottom end, no nitrous

    9.72@142

  18. #17
    Registered User
    Join Date
    Sep 2016
    Posts
    6
    Likes (Given)
    0
    Likes (Received)
    0
    I call BS (Given)
    0
    I call BS (Received)
    0
    Awesome time for sure. Hope to run into you at Fayetteville sometime. I just hope I'm not in the opposing lane...lol
    Lower pulley, Kooks, Fast 85 injectors, LS9 cam, heat exchanger, meth, ice and timing box. D3 Lowering springs; Looking for 9's Hidden Content

  19. #18
    Active Member
    Join Date
    Jul 2014
    Location
    Hagerstown MD
    Posts
    851
    Likes (Given)
    0
    Likes (Received)
    6
    I call BS (Given)
    0
    I call BS (Received)
    0
    looks great man.... flying. I'll be happy with 9.5 next year, let alone 9.2... lol. My local track is already giving me grief about not having a cage with the 9.7's.

    Are you doing drive shaft shop axles? I had them for another project, top quality in my opinion.
    09 CTS-V, airaid, id850s, SW 2inch cat-less, RCR cam, flex fuel and JMS booster, 2.4/9.17, blower spacers, Track Attack and trunk tank. Rick Crawford Tuned. 9.78@140
    15 Passat SE 1.8t

  20. #19
    Vendor
    Join Date
    Apr 2015
    Posts
    518
    Likes (Given)
    2
    Likes (Received)
    24
    I call BS (Given)
    0
    I call BS (Received)
    0
    Quote Originally Posted by mrbikle View Post
    looks great man.... flying. I'll be happy with 9.5 next year, let alone 9.2... lol. My local track is already giving me grief about not having a cage with the 9.7's.

    Are you doing drive shaft shop axles? I had them for another project, top quality in my opinion.
    Yeah that's next
    9.01@153


    Mods: Custom RCR cam,RCR tune, head studs 9.1/2.4, 102 TB, ported LS9 heads, ported snout, 5"intake,1300 injectors, E85, ARH longtubes, 3" exhaust to midmufflers, ZL1 lid, Aldo Trunk mount ice box and HX,17x5 Welds up front, 15x10 Welds on 275Pro, Nitrous spray bar



Sponsored Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)