First Test Session On The 15's
Welcome to the Cadillac CTS-V Forum at CTSVOwners.com.
Results 1 to 13 of 13
Like Tree9Likes
  • 6 Post By Boosted CTS-V
  • 1 Post By Typhoon43
  • 1 Post By Boosted CTS-V
  • 1 Post By VVVROOMTX

Thread: First Test Session On The 15's

  1. #1
    Active Member
    Join Date
    Apr 2014
    Location
    Alpharetta,Ga
    Posts
    359
    Likes (Given)
    69
    Likes (Received)
    34
    I call BS (Given)
    0
    I call BS (Received)
    1

    First Test Session On The 15's

    The track we were at is notorious for being slick and not prepping to well. The car made to fair passes but as you will see and hear in both the car once it gets a few feet out spins a hair costing me a little in the 60foot and of course netting a little slower et.
    both of these passes were high 1.4 60's and both were 9.7's. I will be testing again soon at a better track with the new setup.





    09 A6 Sedan Full bolts on's, Cammed, Jokerz Ported Snout, TPIS 102 Tb, E85, D-Steck Fuel System, 1300cc injectors, Mast Black Label Heads, and Alky Control Dual Nozzle Meth.
    Stock Blower, Stock Bottom End, and Boost Only
    Vengeance Racing Built and Tuned
    9.58@143mph
    172.41 1/2 mile
    779rwhp
    743rwtq

  2. #2
    Active Member
    Join Date
    Aug 2014
    Location
    In a Garage or a Bar..or a garage with a bar in it.
    Posts
    1,501
    Likes (Given)
    2
    Likes (Received)
    65
    I call BS (Given)
    0
    I call BS (Received)
    0
    Rolling out well man. Nice runs!
    Boosted CTS-V likes this.

  3. #3
    Active Member
    Join Date
    Mar 2015
    Posts
    2,195
    Likes (Given)
    0
    Likes (Received)
    41
    I call BS (Given)
    0
    I call BS (Received)
    3
    Moves out pretty well. I also see you need some paint correction
    09' Thunder Gray Chroma Sedan | 6AT | UltraView | Eibach Springs | Velgen VMB5's
    "Factory Freak"

    Mod Pile reaching Critical Mass

  4. Remove Advertisements
    CTSVOwners.com
    Advertisements

  5. #4
    Active Member
    Join Date
    Apr 2014
    Location
    Alpharetta,Ga
    Posts
    359
    Likes (Given)
    69
    Likes (Received)
    34
    I call BS (Given)
    0
    I call BS (Received)
    1
    Quote Originally Posted by Aqua View Post
    Did you log the car?
    Does it show any wheel spin?
    yes and yes it did. I was surprised I was able to hook as well as I did at this track. I am going to a different track this weekend if all goes well and see what we got. I log every pass I make
    09 A6 Sedan Full bolts on's, Cammed, Jokerz Ported Snout, TPIS 102 Tb, E85, D-Steck Fuel System, 1300cc injectors, Mast Black Label Heads, and Alky Control Dual Nozzle Meth.
    Stock Blower, Stock Bottom End, and Boost Only
    Vengeance Racing Built and Tuned
    9.58@143mph
    172.41 1/2 mile
    779rwhp
    743rwtq

  6. #5
    Active Member
    Join Date
    Apr 2014
    Location
    Alpharetta,Ga
    Posts
    359
    Likes (Given)
    69
    Likes (Received)
    34
    I call BS (Given)
    0
    I call BS (Received)
    1
    Quote Originally Posted by VVVROOMTX View Post
    Moves out pretty well. I also see you need some paint correction
    Yes sir you are 110% correct. The paint on the car is rough as hell right now but with all the racing I have coming up no reason to fix it yet. After the Cadillac attack in Florida I will have it all fixed up.
    VVVROOMTX likes this.
    09 A6 Sedan Full bolts on's, Cammed, Jokerz Ported Snout, TPIS 102 Tb, E85, D-Steck Fuel System, 1300cc injectors, Mast Black Label Heads, and Alky Control Dual Nozzle Meth.
    Stock Blower, Stock Bottom End, and Boost Only
    Vengeance Racing Built and Tuned
    9.58@143mph
    172.41 1/2 mile
    779rwhp
    743rwtq

  7. #6
    Active Member
    Join Date
    Sep 2015
    Location
    Katy/Houston
    Posts
    892
    Likes (Given)
    0
    Likes (Received)
    17
    I call BS (Given)
    0
    I call BS (Received)
    0
    NICE! What tire pressure did you run before burn out?
    2012 CTS-V Black Diamond Sedan
    Built Block, TFS Heads, MTI Custom Grind Cam, Level 10 Trans
    ECM Tuned By MTI
    TCM Tuned By Steve Williams
    Boost: 818rwhp Nitrous 1107rwhp
    9.64@142.64 Boost Only & 9.36@149.8 nitrous
    2016 Silver Z06
    E85, Meth, MTI Custom Grind Cam, Kooks Long tubes/Catted X pipe
    ECM Tuned by MTI
    TCM Tuned by Steve Williams
    Boost: 702rhwp
    9.97@141.92
    2017 CTS-V Black Sedan
    11.4@123 stock
    Whipple at 12psi 637rwhp
    Whipple Track times soon ...

  8. #7
    Active Member
    Join Date
    Apr 2014
    Location
    Alpharetta,Ga
    Posts
    359
    Likes (Given)
    69
    Likes (Received)
    34
    I call BS (Given)
    0
    I call BS (Received)
    1
    Quote Originally Posted by Duran View Post
    NICE! What tire pressure did you run before burn out?
    16 on the 9.76 pass and 14 on the 9.70 pass
    09 A6 Sedan Full bolts on's, Cammed, Jokerz Ported Snout, TPIS 102 Tb, E85, D-Steck Fuel System, 1300cc injectors, Mast Black Label Heads, and Alky Control Dual Nozzle Meth.
    Stock Blower, Stock Bottom End, and Boost Only
    Vengeance Racing Built and Tuned
    9.58@143mph
    172.41 1/2 mile
    779rwhp
    743rwtq

  9. #8
    Active Member
    Join Date
    Mar 2015
    Posts
    2,195
    Likes (Given)
    0
    Likes (Received)
    41
    I call BS (Given)
    0
    I call BS (Received)
    3
    Quote Originally Posted by Boosted CTS-V View Post
    Yes sir you are 110% correct. The paint on the car is rough as hell right now but with all the racing I have coming up no reason to fix it yet. After the Cadillac attack in Florida I will have it all fixed up.
    But then again id rather take a fast ass V with swirly paint over my stock slow V haha
    Boosted CTS-V likes this.
    09' Thunder Gray Chroma Sedan | 6AT | UltraView | Eibach Springs | Velgen VMB5's
    "Factory Freak"

    Mod Pile reaching Critical Mass

  10. #9
    Active Member
    Join Date
    Mar 2013
    Location
    Chandler, AZ
    Posts
    202
    Likes (Given)
    0
    Likes (Received)
    2
    I call BS (Given)
    0
    I call BS (Received)
    0
    nice runs

    Are you still running stock shocks?
    2012 Coupe A6
    9.1/2.5, BMR 5" CAI, NW102, JOKERZ fully ported blower, Squash, ID 1000, ZL1 lid, BMR ice box, varimax, Vadder Destroyer HX, ACH headers, High flow cats, KPE Mufflers, Dsteck flex fuel sensor & E85 gauge, Rhett Castillo tuned
    702/691
    10.45@133 1733 DA
    166.29 1/2 mile Gila Bend AZ

  11. #10
    Active Member
    Join Date
    Jun 2013
    Location
    Tallahassee, FL
    Posts
    1,179
    Likes (Given)
    8
    Likes (Received)
    10
    I call BS (Given)
    0
    I call BS (Received)
    1
    nice runs!!! SGMP in valdosta the other track? that place hooks like no other..
    Hidden Content

    2010 WD A6 sedan - Recaros, 20x9/10.5 Concept One CS-6.0 , V2V Designs, Aeroforce, Hawk Pads, Eibachs, Airaid w/green filter, SideSwipe, Ported TB, BR7EF, Solid Iso, ZL1 Lid, 2.4 upper, 100mm Idler, FIC 850s, Kooks, NorCal Tank, Track Attack HX, Varimax Pump, Flex Fuel, DSX fuel system, Vengeance Racing Tuned
    Best 1/8 6.88 @ 104.05
    Best 1/4 10.67 @ 131.95 1.58 60ft -- 75% E
    Track: stock wheels w/ Mickey Thompson DR's 305/35/19

  12. #11
    Active Member
    Join Date
    Aug 2016
    Location
    Baytown, Texas
    Posts
    55
    Likes (Given)
    0
    Likes (Received)
    0
    I call BS (Given)
    0
    I call BS (Received)
    0
    I love the 15 inch conversion

  13. #12
    Active Member
    Join Date
    Mar 2013
    Posts
    370
    Likes (Given)
    0
    Likes (Received)
    11
    I call BS (Given)
    0
    I call BS (Received)
    1
    are you running a 275 tire?

  14. #13
    Registered User
    Join Date
    Nov 2016
    Posts
    24
    Likes (Given)
    0
    Likes (Received)
    1
    I call BS (Given)
    0
    I call BS (Received)
    0
    What offset on the rim and what tire are you running. I need to get a 15" setup for mine as I purchased it with the conversion already done but no drag setup.


Sponsored Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)